Explore the Resource Manager (v3) connector for Doflow.
Creates a folder in the resource hierarchy. Returns an Operation which can be used to track the progress of the folder creation workflow. Upon success, the Operation.response field will be populated with the created Folder. In order to succeed, the addition of this new folder must not violate the folder naming, height, or fanout constraints. + The folder's display_name must be distinct from all other folders that share its parent. + The addition of the folder must not cause the active folder hierarchy to exceed a height of 10. Note, the full active + deleted folder hierarchy is allowed to reach a height of 20; this provides additional headroom when moving folders that contain deleted folders. + The addition of the folder must not cause the total number of folders under its parent to exceed 300. If the operation fails due to a folder constraint violation, some errors may be returned by the CreateFolder request, with status code FAILED_PRECONDITION and an error description. Other folder constraint violations will be communicated in the Operation, with the specific PreconditionFailure returned in the details list in the Operation.error field. The caller must have resourcemanager.folders.create permission on the identified parent.
Requests deletion of a folder. The folder is moved into the DELETE_REQUESTED state immediately, and is deleted approximately 30 days later. This method may only be called on an empty folder, where a folder is empty if it doesn't contain any folders or projects in the ACTIVE state. If called on a folder in DELETE_REQUESTED state the operation will result in a no-op success. The caller must have resourcemanager.folders.delete permission on the identified folder.
Retrieves a folder identified by the supplied resource name. Valid folder resource names have the format folders/{folder_id} (for example, folders/1234). The caller must have resourcemanager.folders.get permission on the identified folder.
Gets the access control policy for a folder. The returned policy may be empty if no such policy or resource exists. The resource field should be the folder's resource name, for example: "folders/1234". The caller must have resourcemanager.folders.getIamPolicy permission on the identified folder.
Lists the folders that are direct descendants of supplied parent resource. list() provides a strongly consistent view of the folders underneath the specified parent resource. list() returns folders sorted based upon the (ascending) lexical ordering of their display_name. The caller must have resourcemanager.folders.list permission on the identified parent.
Moves a folder under a new resource parent. Returns an Operation which can be used to track the progress of the folder move workflow. Upon success, the Operation.response field will be populated with the moved folder. Upon failure, a FolderOperationError categorizing the failure cause will be returned - if the failure occurs synchronously then the FolderOperationError will be returned in the Status.details field. If it occurs asynchronously, then the FolderOperation will be returned in the Operation.error field. In addition, the Operation.metadata field will be populated with a FolderOperation message as an aid to stateless clients. Folder moves will be rejected if they violate either the naming, height, or fanout constraints described in the CreateFolder documentation. The caller must have resourcemanager.folders.move permission on the folder's current and proposed new parent.
Updates a folder, changing its display_name. Changes to the folder display_name will be rejected if they violate either the display_name formatting rules or the naming constraints described in the CreateFolder documentation. The folder's display_name must start and end with a letter or digit, may contain letters, digits, spaces, hyphens and underscores and can be between 3 and 30 characters. This is captured by the regular expression: \p{L}\p{N}{1,28}[\p{L}\p{N}]. The caller must have resourcemanager.folders.update permission on the identified folder. If the update fails due to the unique name constraint then a PreconditionFailure explaining this violation will be returned in the Status.details field.
Search for folders that match specific filter criteria. search() provides an eventually consistent view of the folders a user has access to which meet the specified filter criteria. This will only return folders on which the caller has the permission resourcemanager.folders.get.
Sets the access control policy on a folder, replacing any existing policy. The resource field should be the folder's resource name, for example: "folders/1234". The caller must have resourcemanager.folders.setIamPolicy permission on the identified folder.
Returns permissions that a caller has on the specified folder. The resource field should be the folder's resource name, for example: "folders/1234". There are no permissions required for making this API call.
Cancels the deletion request for a folder. This method may be called on a folder in any state. If the folder is in the ACTIVE state the result will be a no-op success. In order to succeed, the folder's parent must be in the ACTIVE state. In addition, reintroducing the folder into the tree must not violate folder naming, height, and fanout constraints described in the CreateFolder documentation. The caller must have resourcemanager.folders.undelete permission on the identified folder.
Create a Lien which applies to the resource denoted by the parent field. Callers of this method will require permission on the parent resource. For example, applying to projects/1234 requires permission resourcemanager.projects.updateLiens. NOTE: Some resources may limit the number of Liens which may be applied.
Delete a Lien by name. Callers of this method will require permission on the parent resource. For example, a Lien with a parent of projects/1234 requires permission resourcemanager.projects.updateLiens.
Retrieve a Lien by name. Callers of this method will require permission on the parent resource. For example, a Lien with a parent of projects/1234 requires permission resourcemanager.projects.get
List all Liens applied to the parent resource. Callers of this method will require permission on the parent resource. For example, a Lien with a parent of projects/1234 requires permission resourcemanager.projects.get.
Gets the latest state of a long-running operation. Clients can use this method to poll the operation result at intervals as recommended by the API service.
Fetches an organization resource identified by the specified resource name.
Gets the access control policy for an organization resource. The policy may be empty if no such policy or resource exists. The resource field should be the organization's resource name, for example: "organizations/123". Authorization requires the IAM permission resourcemanager.organizations.getIamPolicy on the specified organization.
Searches organization resources that are visible to the user and satisfy the specified filter. This method returns organizations in an unspecified order. New organizations do not necessarily appear at the end of the results, and may take a small amount of time to appear. Search will only return organizations on which the user has the permission resourcemanager.organizations.get
Sets the access control policy on an organization resource. Replaces any existing policy. The resource field should be the organization's resource name, for example: "organizations/123". Authorization requires the IAM permission resourcemanager.organizations.setIamPolicy on the specified organization.
Returns the permissions that a caller has on the specified organization. The resource field should be the organization's resource name, for example: "organizations/123". There are no permissions required for making this API call.
Request that a new project be created. The result is an Operation which can be used to track the creation process. This process usually takes a few seconds, but can sometimes take much longer. The tracking Operation is automatically deleted after a few hours, so there is no need to call DeleteOperation.
Marks the project identified by the specified name (for example, projects/415104041262) for deletion. This method will only affect the project if it has a lifecycle state of ACTIVE. This method changes the Project's lifecycle state from ACTIVE to DELETE_REQUESTED. The deletion starts at an unspecified time, at which point the Project is no longer accessible. Until the deletion completes, you can check the lifecycle state checked by retrieving the project with GetProject, and the project remains visible to ListProjects. However, you cannot update the project. After the deletion completes, the project is not retrievable by the GetProject, ListProjects, and SearchProjects methods. This method behaves idempotently, such that deleting a DELETE_REQUESTED project will not cause an error, but also won't do anything. The caller must have resourcemanager.projects.delete permissions for this project.
Retrieves the project identified by the specified name (for example, projects/415104041262). The caller must have resourcemanager.projects.get permission for this project.
Returns the IAM access control policy for the specified project, in the format projects/{ProjectIdOrNumber} e.g. projects/123. Permission is denied if the policy or the resource do not exist.
Lists projects that are direct children of the specified folder or organization resource. list() provides a strongly consistent view of the projects underneath the specified parent resource. list() returns projects sorted based upon the (ascending) lexical ordering of their display_name. The caller must have resourcemanager.projects.list permission on the identified parent.
Move a project to another place in your resource hierarchy, under a new resource parent. Returns an operation which can be used to track the process of the project move workflow. Upon success, the Operation.response field will be populated with the moved project. The caller must have resourcemanager.projects.move permission on the project, on the project's current and proposed new parent. If project has no current parent, or it currently does not have an associated organization resource, you will also need the resourcemanager.projects.setIamPolicy permission in the project.
Updates the display_name and labels of the project identified by the specified name (for example, projects/415104041262). Deleting all labels requires an update mask for labels field. The caller must have resourcemanager.projects.update permission for this project.
Search for projects that the caller has both resourcemanager.projects.get permission on, and also satisfy the specified query. This method returns projects in an unspecified order. This method is eventually consistent with project mutations; this means that a newly created project may not appear in the results or recent updates to an existing project may not be reflected in the results. To retrieve the latest state of a project, use the GetProject method.
Sets the IAM access control policy for the specified project, in the format projects/{ProjectIdOrNumber} e.g. projects/123. CAUTION: This method will replace the existing policy, and cannot be used to append additional IAM settings. Note: Removing service accounts from policies or changing their roles can render services completely inoperable. It is important to understand how the service account is being used before removing or updating its roles. The following constraints apply when using setIamPolicy(): + Project does not support allUsers and allAuthenticatedUsers as members in a Binding of a Policy. + The owner role can be granted to a user, serviceAccount, or a group that is part of an organization. For example, group@myownpersonaldomain.com could be added as an owner to a project in the myownpersonaldomain.com organization, but not the examplepetstore.com organization. + Service accounts can be made owners of a project directly without any restrictions. However, to be added as an owner, a user must be invited using the Cloud Platform console and must accept the invitation. + A user cannot be granted the owner role using setIamPolicy(). The user must be granted the owner role using the Cloud Platform Console and must explicitly accept the invitation. + Invitations to grant the owner role cannot be sent using setIamPolicy(); they must be sent only using the Cloud Platform Console. + If the project is not part of an organization, there must be at least one owner who has accepted the Terms of Service (ToS) agreement in the policy. Calling setIamPolicy() to remove the last ToS-accepted owner from the policy will fail. This restriction also applies to legacy projects that no longer have owners who have accepted the ToS. Edits to IAM policies will be rejected until the lack of a ToS-accepting owner is rectified. If the project is part of an organization, you can remove all owners, potentially making the organization inaccessible. + Calling this method requires enabling the App Engine Admin API.
Returns permissions that a caller has on the specified project, in the format projects/{ProjectIdOrNumber} e.g. projects/123..
Restores the project identified by the specified name (for example, projects/415104041262). You can only use this method for a project that has a lifecycle state of DELETE_REQUESTED. After deletion starts, the project cannot be restored. The caller must have resourcemanager.projects.undelete permission for this project.
Creates a TagBinding between a TagValue and a cloud resource (currently project, folder, or organization).
Deletes a TagBinding.
Lists the TagBindings for the given cloud resource, as specified with parent. NOTE: The parent field is expected to be a full resource name: https://cloud.google.com/apis/design/resource_names#full_resource_name
Creates a new TagKey. If another request with the same parameters is sent while the original request is in process, the second request will receive an error. A maximum of 300 TagKeys can exist under a parent at any given time.
Deletes a TagKey. The TagKey cannot be deleted if it has any child TagValues.
Retrieves a TagKey. This method will return PERMISSION_DENIED if the key does not exist or the user does not have permission to view it.
Gets the access control policy for a TagKey. The returned policy may be empty if no such policy or resource exists. The resource field should be the TagKey's resource name. For example, "tagKeys/1234". The caller must have cloudresourcemanager.googleapis.com/tagKeys.getIamPolicy permission on the specified TagKey.
Lists all TagKeys for a parent resource.
Updates the attributes of the TagKey resource.
Sets the access control policy on a TagKey, replacing any existing policy. The resource field should be the TagKey's resource name. For example, "tagKeys/1234". The caller must have resourcemanager.tagKeys.setIamPolicy permission on the identified tagValue.
Returns permissions that a caller has on the specified TagKey. The resource field should be the TagKey's resource name. For example, "tagKeys/1234". There are no permissions required for making this API call.
Creates a TagValue as a child of the specified TagKey. If a another request with the same parameters is sent while the original request is in process the second request will receive an error. A maximum of 300 TagValues can exist under a TagKey at any given time.
Deletes a TagValue. The TagValue cannot have any bindings when it is deleted.
Retrieves TagValue. If the TagValue or namespaced name does not exist, or if the user does not have permission to view it, this method will return PERMISSION_DENIED.
Gets the access control policy for a TagValue. The returned policy may be empty if no such policy or resource exists. The resource field should be the TagValue's resource name. For example: tagValues/1234. The caller must have the cloudresourcemanager.googleapis.com/tagValues.getIamPolicy permission on the identified TagValue to get the access control policy.
Lists all TagValues for a specific TagKey.
Updates the attributes of the TagValue resource.
Sets the access control policy on a TagValue, replacing any existing policy. The resource field should be the TagValue's resource name. For example: tagValues/1234. The caller must have resourcemanager.tagValues.setIamPolicy permission on the identified tagValue.
Returns permissions that a caller has on the specified TagValue. The resource field should be the TagValue's resource name. For example: tagValues/1234. There are no permissions required for making this API call.